Tablet Wall Mount for Kiosk Satellite Home Assistant Dashboards
Landscape / Black
$24.75
Skip to product information
4.93 from 432 shop reviews
Tablet Wall Mount for Kiosk Satellite Home Assistant Dashboards
$24.75
Fits these models
- All tablets about 7" and up, landscape (16.5 cm / 6.5" wide or more)
- All tablets about 8" and up, portrait (12 cm / 4.7" wide or more)
Which orientation do I pick?
Measure the tablet edge that will sit in the mount: the long edge for landscape, the short edge for portrait.
| Edge in the mount | Pick | Screen size |
|---|---|---|
| Short edge under 12 cm (4.7") | Landscape only | About 7", e.g. Fire 7 |
| Short edge 12–16.4 cm (4.7–6.5") | Portrait or Landscape | About 8–10", e.g. iPad mini, Fire HD 8, Galaxy Tab A9 |
| Short edge 16.5 cm (6.5") or more | Landscape, even to hang it in portrait | About 10.5" and up, e.g. iPad 10th gen, iPad Air, Pixel Tablet, Galaxy Tab A9+ |
Tip: choose the largest mount your tablet fits. A wider plate holds better.
Not listed? Check your model before you order.
- Made in CanadaMounting tolerances tested on the real device
- US tariff exemptExempt under CUSMA.
- Ships worldwide from CanadaShipping calculated at checkout in your currency. Ships in 2–4 business days.
- 14-day returnsNew, unused items in original condition
- Not sure it fits?Send us your model number before you order
Secure checkout
A slide-out wall mount for a tablet with one job: a locked-down kiosk screen, or a satellite dashboard in a room away from your main panel. The wall plate stays on the wall, and the tablet slides out of the top for charging or an update.
- Landscape fits tablets 16.5 cm (6.5") wide or more. Portrait fits a short edge of 12 to 16.4 cm.
- Wall plate fixes with 2 screws or command strips.
- Open center and hole spacing for North American (3 9/32") and European (60 mm) boxes.
- Black or white.
Made in Canada.
What is a satellite dashboard?
A smaller, secondary screen in a bedroom, hallway, garage or workshop that shows the controls for that room, while your main panel stays where the household gathers. Because each screen has a narrow job, it can be a modest tablet.
Does it work with Fully Kiosk Browser and Home Assistant?
Yes. The mount has no electronics or app, so it holds the tablet whatever it runs. Android tablets often use Fully Kiosk Browser to launch the dashboard on boot and hide the browser. iPads can use Guided Access or the Home Assistant Companion app. A tablet set up as a voice satellite for Home Assistant Assist sits on it the same way.
How do I keep a kiosk tablet powered on the wall?
The wall plate can sit over a recessed box, so power can come out of the wall behind the tablet instead of running down it. Check which side your charging port is on before you pick a position, and follow your local electrical code for any in-wall work. Without in-wall power, slide the tablet off to charge it.
Guides and instructions
Questions and specs
Will it fit my device?
Fits tablets about 7" and up, landscape (16.5 cm / 6.5" wide or more); tablets about 8" and up, portrait (12 cm / 4.7" wide or more). If your model is not listed, contact us before ordering.
What's included?
Tablet plate with security tape already applied, wall plate, 2 screws, and command strips.
How does it install?
Stick the tablet plate to the back of the tablet. Fix the wall plate with the 2 screws or the command strips (wait one full hour after applying strips before hanging). Slide the tablet down onto the wall plate; slide it up and off for charging or an update.